Skip to content
The Business Loan Store

Equipment and vehicles

What Happens at the End of an Equipment Lease?

Your equipment or vehicle lease is nearly up. This guide compares the four end-of-term options side by side, explains how residuals work, and sets out a timeline and checklist.

Published
Reading time
13 min read

Key takeaways

  • At the end of a finance lease you generally have four routes: pay the residual and keep the asset, return it, extend, or refinance the residual into a new facility. Your contract decides which are open to you.
  • Start at least 90 days before the end date. Notice periods, inspection rules and quotes all run on the lessor's clock, not yours.
  • The residual is a lump sum set at the start. Compare it with what the asset is really worth now, because the gap decides whether buying it out is a good deal.
  • Under a lease, GST may apply to the residual payment as a separate transaction, so budget for it and ask your accountant how it lands on your BAS.
  • Once you pay out, check the PPSR registration is removed. A leftover registration can cause trouble when you sell or borrow later.

When an equipment lease ends, you generally choose between four routes: pay the residual and keep the asset, return it, extend the lease, or refinance the residual into a new facility. Which of those is actually open to you depends on the type of lease you signed and its end-of-term clause, so the first job is to find that clause and the date.

This guide sets the four options side by side, explains how the residual is set and what it can cost you, gives you a 90-day timeline, and finishes with the checks that stop a tidy ending from turning into a surprise bill.

What are your options when an equipment lease ends?

You can usually pay out the residual and own the asset, sell or trade it in to clear the residual, extend the lease, refinance the residual, or hand it back. Contracts differ, so treat the table as a map and your paperwork as the final word.

Option What happens Suits you when Watch for
Pay the residual and keep it A lump sum settles the lease and the asset becomes yours The asset is still earning its keep and is worth at least the residual GST on the payment, and cash needed on the day
Sell or trade in You sell the asset and use the proceeds to clear the residual Its market value is above the residual Timing: the lessor wants its money by the end date
Extend the lease You keep using it for a further agreed period You need more time, or your cash is tight this quarter Whether the extension is offered at all, and what it adds to total cost
Refinance the residual A new facility pays out the lessor and you repay over a new term You want to keep the asset but spread the lump sum The new lender will assess the asset and your business afresh
Return it The lessor collects the asset and inspects it You no longer need it, or it is worn out Condition charges and excess usage fees

Business.gov.au’s guide to choosing funding is a useful neutral starting point for how different finance products are structured. For the difference between lease types, our guide to chattel mortgage vs finance lease covers who owns the asset during the term.

How is the residual set, and why does it matter now?

The residual is the lump sum agreed at the start of the lease as the estimated value of the asset at the end of the term. A bigger residual keeps the regular payments lower, which is the trade you made on day one and are now settling.

Our own piece on asset finance explains how balloons and residuals fit the wider picture. For the end-of-lease decision, only three things matter:

  1. The number. Find it in your contract. It may be shown with or without GST, so check which.
  2. What the asset is worth today. The residual was a forecast. The market may have moved either way, and condition and hours or kilometres matter.
  3. What you would pay to replace it. If replacing the asset costs far more than paying the residual, keeping it is often sensible. If the residual is higher than the asset’s real value, you are being asked to overpay.

A quick test: get one independent estimate of the current value (a dealer appraisal, an auction-house opinion or a broker’s guide for that kind of equipment). Put it next to the residual. The difference is the real price of keeping the asset.

When does paying out the residual make sense?

Paying the residual makes sense when the asset is in good condition, still central to the business, and worth at least the residual. You also need the cash, or another way to fund the lump sum.

It tends to fit when:

  • the equipment is paid for by the work it does, such as a coffee machine, a press brake or an excavator on steady hire;
  • replacing it would cost more than the residual and the downtime would hurt;
  • you have cash set aside, or you plan to fund the payment with a refinance so the cash stays in the business.

It fits less well when the asset is outdated, its repair costs are climbing, or the residual was set optimistically. Do not pay a lump sum just because the letter says it is due.

What about GST on the residual?

Under a lease, the ATO says GST may be payable on a residual payment, and it treats that payment as a separate transaction to the lease itself. The ATO’s page on GST, hire purchase and leasing is the place to read this. Chattel mortgages and hire purchase are treated differently, because the ownership and GST position is set up differently at the start. In practice, ask your accountant how the residual will be treated for your business, and whether you can claim GST credits on it, before you transfer the money.

When is returning the equipment the better move?

Returning it suits you when you no longer need the asset, or it is worth less than the residual, and your contract allows a return. Operating-style leases are built around this, and many finance leases do not give a free return, so read the clause before you plan on it.

Before handing it back:

  • Ask the lessor in writing for its return conditions and inspection standards.
  • Photograph the asset with dates, and gather service records.
  • Check for excess usage fees, damage charges and who pays for collection.
  • Confirm in writing that returning it settles everything, and what happens to the residual.

If your contract gives the lessor the right to charge for wear beyond its own standards, ask what those standards are before you decide. ASIC’s page on unfair contract term protections for small businesses is worth a read if a standard-form contract contains a clause that looks one-sided.

What about extending the lease?

Some lessors offer an extension, which keeps your regular payments going for a further period instead of a lump sum. It is a bridge, not a fix: you are still paying for an asset that is ageing.

An extension is worth considering when you are cash-tight for a short time, a new asset is on order and the old one needs to run a few more months, or the lessor will extend on the existing structure without a fresh credit assessment. Ask for the extension terms in writing, including what happens to the residual, since it can be rolled over rather than reduced.

Can you refinance the residual?

Often yes, provided the asset still has enough value and your business meets the new lender’s criteria. A new lender pays out the lessor and you repay the amount over a fresh term, usually as a secured loan against the asset. See our equipment finance page for how this type of facility works, and vehicle and fleet finance if the asset is a ute, truck or fleet.

Lenders typically look at:

  • the age and type of the asset, and whether it is easy to resell;
  • the payout figure and the remaining useful life;
  • how the business has repaid so far, its current debts and its cash flow;
  • whether the lease was paid on time. A clean record helps.

Our guide to how lenders assess business loans goes through what they look at in more detail, and secured vs unsecured business loans explains why the asset itself usually does the heavy lifting.

If you would rather have someone compare the lenders that handle this kind of refinance for you, see if you qualify. It takes about a minute, and there is no credit check to get matched.

A worked example: a physio clinic with a lease ending

This is an illustration, not a real client. A physiotherapy clinic in Adelaide leased a set of treatment tables, a shockwave device and a small piece of rehab equipment on a finance lease. The lease ends in March. The contract sets a residual of 15 per cent of the original cost.

Ninety days out the owner does four things:

  1. Reads the end-of-term clause and learns that return is allowed only for the device, not the tables.
  2. Gets a dealer’s estimate of what the whole package is worth now. It comes in a little above the residual.
  3. Asks her accountant about GST on the residual and how it affects her next BAS.
  4. Asks two lenders what refinancing the residual would look like, because she does not want to drain cash before a busy autumn.

The numbers favour keeping the tables and device because they are central to every appointment, and the estimate is above the residual. She chooses to refinance the residual over a shorter term, arranged a month before the end date, so the lessor is paid on time. The rehab equipment is old and unused, so she returns it. Three decisions, three different answers, because the assets were not the same.

What does a 90-day timeline look like?

Start about 90 days before the end date, because lessors, valuers and new lenders all need lead time. Here is a workable schedule.

When Do this
90 days out Find the contract, end date, residual figure and end-of-term clause. Ask the lessor for a written payout and return conditions.
75 days out Get a current value estimate. Note repairs, usage and condition. Ask your accountant about GST and tax treatment.
60 days out Decide: keep, sell, extend, refinance or return. If refinancing, start the application now.
30 days out Confirm lender approvals and settlement date, or the return and collection arrangements. Check for notice deadlines.
End date Settle the residual or hand the asset back. Get written confirmation.
2 weeks after Check the PPSR registration is removed, and update insurance and your asset register.

Many contracts have a notice window. Missing it can mean the lease rolls over, or default terms apply, depending on the contract. Check yours.

How do you compare the options in dollars?

Add up what each route costs over the next 12 months, not just what leaves your account this month. For each option, write down the cash out on the day, the regular payments afterwards, any GST you can or cannot claim back, repairs you expect, and what the asset could sell for at the end.

Paying the residual from cash has the biggest day-one hit but the lowest ongoing cost. Refinancing keeps cash in the business but adds payments and fees. Extending is cheap to start but leaves you with an older asset and the same residual question later. Returning avoids the lump sum but means replacing the asset, often on a new lease with its own residual. Seen over a year, the cheapest-looking option on the day is often not the cheapest overall, so put all five on one page before you choose.

What should you check after the lease ends?

After paying out or returning, confirm three things: a written payout or closing letter, the PPSR registration being removed, and your own records and insurance being updated. These small steps prevent the problems that turn up months later.

  • Closing letter. Ask the lessor to confirm in writing that nothing further is owed.
  • PPSR. Lenders register their security interest on the Personal Property Securities Register. The PPSR’s page on discharging a registration explains that registrations should be removed once the debt is repaid and describes an amendment demand process if the secured party does not act. A stale registration can hold up a sale or a new loan.
  • Records and insurance. Update the asset register, depreciation schedule and cover. If you now own the asset, insure it as yours.

Which mistakes cost owners the most at lease end?

The mistakes that cost the most are leaving the decision too late, paying the residual without checking the asset’s real value, and ignoring GST and notice rules.

  • Leaving it until the last fortnight. Quotes, inspections and refinance approvals do not arrive overnight, and the lessor may roll the lease over or charge extra.
  • Assuming the residual is a fair price. It was an estimate made years ago.
  • Not checking return conditions. Wear charges can be a surprise if you never saw the standards.
  • Forgetting the lump sum’s GST and BAS impact. Ask before you pay.
  • Leaving the PPSR registration in place. It is easy to forget.

Ready to look at your options?

An ending lease is a good moment to look at the whole picture instead of defaulting to whatever the lessor’s letter offers. We help business owners compare the finance that could pay out a residual, replace the asset or spread the cost, and there is no pressure to take any of it.

When you see if you qualify, a few things are worth knowing. Enquiring takes about a minute, and there is no credit check to get matched, so your credit file is not touched just for asking. We do not send your details to a pile of lenders: they are only shared with the lenders your business is referred to, and a real person looks at your situation and calls you. Please fill the form in accurately, including the asset, the residual and the end date, so we can match you with the right option first time. A direct lender application is a separate step, and the lender will tell you what it checks.

See if you qualify →

Questions about this topic

What happens at the end of an equipment lease?

It depends on the contract. With a finance lease you can usually pay the residual and keep the equipment, sell it or trade it in and use the proceeds to clear the residual, extend the lease, or refinance the residual. With an operating-style lease you generally return it, extend, or replace it with a new lease. Read the end-of-term clause first.

What is a residual payment on an equipment lease?

It is the lump sum set at the start of the lease as the estimated value of the asset at the end of the term. Paying it lets you take ownership, and a larger residual usually means smaller regular payments during the term.

Can I extend or refinance the residual instead of paying it?

Often, but not always. Some lessors offer an extension, and a different lender may refinance the residual into a new facility, provided the asset still has enough value and your business meets its criteria. Ask early, because terms vary by lender and product.

Is GST payable on the residual?

Under a lease, the ATO says GST may apply to a residual payment, and it treats that payment as a separate transaction to the lease. Chattel mortgages and hire purchase are handled differently. Confirm the exact treatment with your accountant before you pay.

What if I just hand the equipment back?

If your contract allows a return, the lessor will usually inspect it against set condition standards and may charge for damage, excess wear or missing parts. Take dated photos, keep service records and ask for the inspection standards in writing well before the end date.

What if the equipment is worth less than the residual?

Then paying the full residual to keep it is poor value. Look at returning it if the contract allows, negotiating the payout, or using a different option, and get an independent estimate of its current worth before you decide.

Does a lease ending affect my ability to borrow again?

A clean finish usually helps, because it shows a repayment record. What lenders look at is the track record, the asset and your current debts. If you are unsure which option suits, you can ask us to match you with lenders with no credit check to get matched.

Do I need to do anything about the PPSR after I pay out?

Yes, check it. Lenders register their interest on the Personal Property Securities Register, and that registration should be removed once the debt is paid. If it is not, the PPSR describes a formal amendment demand process you can follow.

Sources

  1. GST: hire purchase and leasing, Australian Taxation Office
  2. Discharging a registration, Personal Property Securities Register
  3. Choose your funding, business.gov.au
  4. Unfair contract term protections for small businesses, ASIC

Related guides

Not sure where you fit? Let us find it.

Tell us about your business once. We will review your circumstances and identify lenders that may be relevant.

Start typing to search finance types, lenders, products and guides.